Personal Water Craft Forum banner

Search results

1-20 of 334 Results
Advanced Search
  1. blaster 1 carb question, jetting.

    Yamaha Jetski
    Those little grommets usually slide in pretty easy. I bought a little brass tool with a little ball on the the end which fits perfectly into that hole in the grommet. This makes it extremely easy but isn't necessary for installing these. When you pushing the grommet threw, push in a circular...
  2. blaster 1 carb question, jetting.

    Yamaha Jetski
    According to the Factory Pipe instructions, the jetting should be 120 pilot, 145 main. What FA are you running? What is your altitude? What needle seat? What is your popoff pressure? All of these will affect which jetting you should run. Sorry for all of the questions, but there are a ton of...
  3. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    It has been a while but I figured I would give an update on the Blaster. I picked up a TDR water box, Ocean Pro Vortex flame arrestor, installed a primer, relocated the Ebox, and finally tracked down one of the Wetjet/Westcoast intake manifolds with the built in reed stuffers. I'm going to get...
  4. 96 Tigershark Montego Rebuild

    Tigershark Jetski
    Looks great! Good job! Keep us posted on your progress!!!
  5. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    Got the pipe installed! Now I just need to finish the Ebox relocation and then I'm on to the new intake and carb!
  6. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    Here's the pipe after being painted. I should get it installed tomorrow!
  7. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    Sorry not sure what happened to the pictures :(
  8. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    I took my new Westcoast head and painted it the factory Yamaha blue/silver color. 78E875C5_zps84976c5e.jpg Photo by 98yota | Photobucket I got the head installed with the new exhaust bracket 98E8324B_zps751e3170.jpg Photo by 98yota | Photobucket The exhaust manifold in place. All that's...
  9. Triple trailer

    Yamaha Jetski
    Good job! Looks great!!
  10. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    Hi everyone! I'm in the process of building my Blaster. I'll first list off the new additions to my ski: I ported the case to flow into the exhaust system, new ported intake with SBN46 carb off of a Wetjet Kraze, modified black pipe from a Wetjet Kraze, Westcoast head with 31cc domes (still...
  11. Prop advice for my 93 Waveblaster!

    General PWC & Jetski Discussion
    Hi everyone! I'm in the process of building my Blaster. I'll first list off the new additions to my ski: I ported the case to flow into the exhaust system, new ported intake with SBN46 carb off of a Wetjet Kraze, modified black pipe from a Wetjet Kraze, Westcoast head with 31cc domes (still...
  12. 2008 Kawasaki Ultra 250x idling and power problems

    Kawasaki Jetski
    Sounds like the battery might on its last legs. A fresh battery makes a huge difference in these things.
  13. 94' SL650 Weird Spark Problem

    Polaris Jetski
    Sounds like the CDI might be shot...
  14. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    It's been a while since I've done anything to the Blaster so I figured it is time for some upgrades! I'm throwing on a westcoast head, making a wet jet (west coast) Kraze exhaust on, mikuni SBN 46, ported the intake and a new flame arrester. This should be a good start! I'll post pictures of...
  15. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    Just wanted to give you an update. I went ahead and pulled the Ebox and removed the coil, CDI, starter relay and regulator. After testing, I found the CDI out of spec. I already had new replacements on hand so I went ahead and switched them all out. I put the battery in and plugged in my...
  16. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    CDI is here!! Tomorrow's going to be a long day of wrenching! Any input on the removal of the spark plug boots?
  17. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    The coil I ordered arrived today. To change the spark plug boots, do I only need to just cut the zip tie and twist the cap off? I tried this with my original boots and they broke off. I cut the end off and striped about a 1/4" so it would have a clean connection. The coil I ordered is used...
  18. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    The new stator I installed is working! No spark yet, but I'm getting somewhere! I won an OEM CDI and coil on eBay today and they will be arriving soon so I should have my old ski up and running. I love riding my Wavejammer but I'm going through withdrawals from not riding my Blaster!!! :)
  19. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    I'm sorry, I meant to say I unplugged the black and white harness in irder to disable the stop switch.
  20. 1993 WaveBlaster / 1989 WaveJammer project

    Vintage Jetski
    Thanks 1157rider! I appreciate the help! I'll let you know what I find. I'm set now!
1-20 of 334 Results
Top