Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
285 Posts
Look up under the ski in the intake for the pump make sure their isn't anything wrapped around the shaft, string, fishing line or anything like that, and look at your prop too and make sure their isn't any nicks in it or chips out of it, as this would cause a imbalance and make for the vibration. Could possibly be the bearing going out. Their should be a grease zert towards the back of the ski once you remove the seat and your carrier for the tool kit and fire extinguisher. Pump some grease into it and see if this helps solve the problem. Keep us posted.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.