Personal Water Craft Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello all,
I have a 2004 gp1300r with a 1300 non-powervalve motor in it. When I got it the instruments were only partly working, so I put in a new instrument pack. Now that it is all hooked up correctly, the warning alarm goes off when running. According to the code it is due to the missing powervalve motor. My question is, is there a way to bypass the warning system so that the alarm no longer goes off?

I was thinking that the guys who run the riva gas powervalves may have experience with this.
Thanks in advance,
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
The 05 and newer gp1300r's are non-powervalve engines. I believe someone swapped in an engine from a newer 1300r and removed the powervalve motor and electronics.

The display does not say anything, but the warning light goes off with the beeper. When I ran the diagnostics the code points to the lack of signal from the powervalve electric motor.
 
1 - 3 of 3 Posts
Top