Personal Water Craft Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
First of all I know nothing about electronics. So here is where I am at..I have a 1988 yamaha waverunner with a 500 engine. I have no spark at the plugs. I bought a Ohm meter but I don't know how to use it. I have the ignition coil off the motor. Can anyone give me step by step as to how and check the ignition coil...where to set the Ohm meter on and what it should read if good or bad?
Thank you for your help!!!!
 
1 - 1 of 1 Posts
Top