Personal Water Craft Forum banner
1 - 4 of 4 Posts

· Registered
10 Posts
Discussion Starter · #1 · (Edited)
I just bought the GTS and twice now started hard after cleaning plugs.
Once it starts it is fine but I get this sticky black gunk that comes out the back onto the ground.

Ideas/suggestions? Thanks.

UPDATE: The oily black stuff comes out only when started when cold and not everytime. I'll crank it for a while, pull the plugs and clean the wet/oil off them, heat the plugs up with a lighted and start the engine using the trottle to keep it going, then the gunk comes out the back onto the driveway. A real mess. Not sure what is going on. I will attempt again this weekend and take pictures this time.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.