Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
12 Posts
I have two of these. I assume someone installed an aftermarket primer because it doesn't come with one. I do not use a primer. I would bypass the fuel switch and run a new hose from the reserve pickup, to a new filter, then to the carbs. Make sure the fuel pickup is not shoved too far into the bottom of the tank. I connected the two unused, old fuel lines to the old filter in case I need to switch back.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top