Personal Water Craft Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a wave venture 760 with some spark issues hoping for some advice. The bike flooded after a bad storm about 6 months ago at the family summer house. The bike ran perfect before this. It had no spark so I started checking connections. I took off front stator cover and it was not wet, but could see that water had gotten into it. I cleaned up the internals, wiring, grounds etc. it started and ran in trailer for about 30 mins with hose. I shut it off and wouldn’t start again. Took front cover off again to see if something came loose, bolted it back up and it started again. I changed all the internals on stator cover and went for a ride for about an hour. Shut it off and no spark. Once again take off front cover bolt it back up had runs like new...until you turn it off. I already ruled out kill switch by disconnecting it and starting it. I know it’s a long post. Any help is appreciated. Randy
 
1 - 1 of 1 Posts
Top