Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,032 Posts
Guess #1: The no running after doing turns, makes me think its a fuel flow problem, or dirty carb. All the turning and hard riding have stired up debris, which has been sucked into the filter or into the carbs. I'd check the fuel line and filter for debris, then clean the carbs if that doesn't fix it post back.............I could be totally off base, but that is a starting point.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top