Personal Water Craft Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I am about to install an ignition update kit on my 1999 Polari slth.

I read the instructions, and at the end they state to disconnect a ground wire between the electrical box and the battery. The jetski is not at home right now, so I can look at the battery to see the ground wire.

Is there only one wire on the negative battery terminal? How will know which wire to disconnect?

If anyone has installed the iginition update kit, I would greatly appreciate any information or lessons-learned that will help me install the update kit.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #2
Update kit installed

Nobody posted a reply to my note, but here is an update. I sucessfully installed the ignition update kit in my jetski, replaced the starter, and replaced everything except the terminal board in my electrical box. The jet ski fired-up on first crank and runs great. The ski has never started so easily since I purcashed it. I think the electric system has been the source of my hard starting, failure to start when hot, and poor idling porformance all along.
 

·
Registered
Joined
·
3 Posts
Now that you have installed the upgraded ingnition kit, do you have any advice?
What was the name of your kit and where did you get it from?
Thanks!
Dean
 

·
Registered
Joined
·
2 Posts
I have a 1999 Polaris SLTH as well
Can you please provide the instructions for the updated ignition kit.

I purchase the stator separate

I purchased the ignition and update cdi separate

I don't have instruction

was able to get it to start out water but once it hits water it won't start..

thanks brother
 

·
Registered
Joined
·
2 Posts
Update kit installed

Nobody posted a reply to my note, but here is an update. I sucessfully installed the ignition update kit in my jetski, replaced the starter, and replaced everything except the terminal board in my electrical box. The jet ski fired-up on first crank and runs great. The ski has never started so easily since I purcashed it. I think the electric system has been the source of my hard starting, failure to start when hot, and poor idling porformance all along.
Can you please send me the updated ignition kit instructions and any tips

[email protected]

fax 574 293-5558

I would greatly appreciate it
 
1 - 5 of 5 Posts
Top