i just got this ski about a week ago. i noticed when going from stand still to WOT it would feel very slugish or cavitate some i had a 98 gp 1200 and never had this problem is there a diffrence in the pumps? i just seems like the ski isnt as responsive as id like. what to do to help??:dunno:
2000 GP1200R cavitate's
1 - 2 of 2 Posts
Joined
·
1,512 Posts
look at the impeller
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
2018 Yamaha VX Cruiser VX1050A - Service Manual
Yamaha JetskiI looked on email and tried to use Google to get the service manual for my 2018 Yamaha VX Cruiser VX1050A without any success. Any suggestions on where I can get this? I am ok with either digital or a physical copies.- 9
- 114
-
2006 VX 110 Deluxe - running like in L Mode
Yamaha JetskiI have a 2006 VX110 Deluxe that I sent to a repairman to replace my Impeller because it was running rough. Just got it back and now it will not go over 5000 RPMs at 7mph. It seems to feel like it is in L Mode, although the L Mode light is not on and when I turn on the ski it only beeps twice...- 0
- 101
-
Khebert · updated
-
2006 vx1100 shakess violently when over 5mph
Yamaha Jetskii have a 2006 vx1100 that shakes when i go over 5mph. this problem occurs intermitently. sometimes if i turn the ski off and restart the problem goes away. the last 3 times atthe lake i have had this problem. im not too sure what to do or look into.- 8
- 2K
-
2006 VX110 Deluxe running on only 2 cylinders
Yamaha JetskiWas out in pretty rough water yesterday and it seemed to have limited power but ran well. Today it's only running on the front 2 cylinders and won't go over 15...... any ideas????? electrical maybe?- 6
- 1K
-
Problem running VX110 in water
Yamaha JetskiI have a 2006 VX110 deluxe and took it out a few weekends ago and had no problems. Last weekend when i took it out once i got out of the marina i went to accelerate and the motor didnt rev past 5000 rpm. It was not in low rpm mode either. I recently changed the battery but had no problem with it...- 7
- 19K
Join now to ask and comment!