Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
first thing I would do is step your sponsons. Its free to do and it makes a huge difference. You wont pop out of the warter as easy which helps give you the drive for speed. (You can still jump the ski if you want) Basically take them off, and drill out the center of the center slot. Keep the front hole in the lower location, and pu tthe back hole in the upper location. This puts them on a slight angle and it will help.

Another thing you will want to do is seal the pump housing. The easiest/ cheapest way to do this is fill the opeinings with expanding foam and then trim it off. But if you do this you def need the intake grate. If you do the pump housing and not the grate then you will have problems not allowing the pump to get enough water when you want (Cavitation)
 
1 - 1 of 1 Posts
Top