Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 · (Edited)
I have a 2000 GTX it was not running good this summer had to hold choke out to get it to go. Sent it in to get the carbs soaked and cleaned it is running better but stalls at mid range. Also after you let the throttle off going full throtle. the original problem was stalling at hole shot that seems to be fixed.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.