I just got me a used 2000 SUV for $900. The guy told me he had the engine looked at and it was blown. Everything in the engine compartment looks real clean and there are no visible damage to the engine other than a missing oil injector pump. My main question is has anybody put a different engine in this monster due to the huge amount of space in the hull? I am needing replacement control cables as well ..... who is a good supplier for SUV parts since the SUV is discontinued? Here is the last question ..... anyone have a .PDF copy of the factory Service/Repair book from Yamaha ?
2000 Yamaha SUV
Join the discussion
Recommended Reading
-
Motor Id
Yamaha JetskiI have a 1998 XL 1200 waverunner and i'm trying to figure out if the motor is a 1200 or a 1200r. I going to set the Popoff pressure on the carbs and the spec pressures are completely different on the two motors.- 1
- 32
-
2005 xlt 1200 water in crankcase
Yamaha JetskiHere is a pic of what I found when i disassembled a XLT1200 recent acquisition. Waverunner has not run since 2016. Don't know the backstory how the water got in, maybe rolled and continued to run? Crank will not spin for obvious reasons. Cylinders were in great shape. Few questions, Is any...- 5
- 102
-
2 Non running gp 800s
Yamaha JetskiSo I bought these two yamaha gp 800s yesterday for 400 bucks with a double trailer. The guy that I bought them from said he got them from a buddy back in 2013 and he just said they didnt run. I figured what the heck the trailer is worth the 400 to me. The skis are a 1998 and a 2001. Does anyone...- 28
- 833
-
2014 Yamaha 1.8 HO Cruiser
Yamaha JetskiWhile changing the spark plugs preparing my ski for this coming season, I noticed corrosion on each plug between the drive hex and the rubber boot attachment area. What could be the cause? Thank you.- 6
- 171
-
Ray Pollard · updated
-
'05 gp800r premix conversion and gasket application
Yamaha JetskiGood day, just acquired new to me 05 gp800r and 05 xlt1200 from a friend who wanted them gone. both with bad top ends. My first two PWC ever, and I'm pushing 50. I'm pretty handy, but no mechanic. Disassembly went very well, straightforward. found problems with low compression. maybe this...- 11
- 572
Join now to ask and comment!