Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Can anyone H E L P !!!!! I have a '02 800 DI that set for about 18 months with stable in the gas. I put a new battery, plugs,oil and gas. It's fire every once in awhile but will then backfire. There is a oil and gas mixture comming out the exhust. I have 24 volts at the injectors while cranking. I used the service manual and tested everything i could without the software. Do u know where i can get the software or dose any one know how to HELP?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.