Joined
·
4 Posts
How do i remove the drive off the crankshaft to get to the lower end seals?? any help would be appreciated
2003 kawasaki sxr 800???
Join the discussion
Recommended Reading
-
1997 kawasaki 1100 stx jet ski weak spark where to start
Kawasaki JetskiJust picked up this 97 1100 stx they told me it shot off last year on the water and would not start they didn't wont to mass with it so here I am. So far I checked gas is good oil is good found weak spark lights the taster barely all 3 cyl. compression 110. Pulled over off cover on electrical...- 0
- 68
-
leo · updated
-
Troubleshoting for no spark.
Kawasaki JetskiI have a 1999 Kawi ZXI 1100. It has no spark. I was given this from a friend as they have had enough with trying. So, I want to start from the beginning and figure out what is wrong, and how to fix it. What are some simple things that could cause no spark? He had mentioned he thinks its the...- 3
- 2K
-
1987 Kawasaki js440
Kawasaki JetskiI just purchased a bn44 carb and intake for my ski and I had a spacer on my bn38 carb and when I go to bolt it on the fuel pump hits the head is there a different spacer I need to get thats thicker or do I need to get a different intake.- 0
- 66
-
Kawasaki 900ZXI stuck cylinder block
Kawasaki JetskiHello all, I am trying to do a top end job on my 1996 900ZXI and I can’t get the cylinders off the rest of the block. I’ve tried banging it with a mallet and a 2x4 and plenty of PB blaster. Also can’t find a place to get a pry bar on it. Does anyone have a better idea or way to get theses off...- 0
- 94
-
mmspisek · updated
Join now to ask and comment!