OK, so low oil pressure at tick over 25 psi was the reading, on reading many posts i 1st suspected the oil pressure regulator valve was the issue.
On inspection the oil filter had many metal particles, so engine out and 1st call was to remove the PTO housing, the strainer filter had some large...
I was cruising around 50mph in my 1998 sea doo gti (has a brand new motor; 6 hours) and it all of a sudden drops down to about 30 mph. So I thought I sucked something up. I shut it off rocked it and it started better so I went on my way and I heard a loud clunk and the ski slowed down to 20mph...
Just stripped down the motor of my 4 tec seadoo engine and the head has damage.
Thoughts please on what i should do here.
As you can see its badly pitted, but generally not bad other than the pitting
Thanks in advance
I have a 1993 seadoo xp that is apparently clogged. It shut down, got the overheating beep when trying to start it. So i let it cool down, started it out of water and plugged the hose in but no water is coming out the tell tale.
Where would you begin? Any tips are appreciated!