Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
I have an 87 650sx and it has a westcoast pipe and intake with a mikuni 44mm, and i cant get the thing to run right. I rebuilt the carb and it will start up and run but seems to run out of gas. There is ample gas going to the carb and it appears to be pumping gas. Does anybdy know what the aprox. tunning should be on this 44mm carb.

I also found a little orvice thing in the return line, my guess to keep pressure on the system?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.