Personal Water Craft Forum banner
1 - 2 of 8 Posts

· Registered
Joined
·
194 Posts
Next time it does that choke it out! It dieseled on you. This is a condition that happens when there is an air leak in the base gaskets. What is happening is fire should be happening on top of the cylinder and since you have a leak it is happening on top and in the crankcase therefore you get what you got! First tourque the jugs down to the proper specs and see if that stops it. If not replace your base gaskets. It won't do it in the water due to back pressure on the engine. But don't screw with it until you fix it.:appl:
 

· Registered
Joined
·
194 Posts
Do a compression test before you take off the jugs. that will tell you if there is any other problems (usually). While you have the jugs off go have them honed and put new rings on the Pistons. It will be like a new motor. After you have it torn down you will be able yo see pretty much everything you need to. Get back to me.:appl:
 
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top