Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Last summer i flooded my jetski and the wire box was full of water and it wouldnt run. I had it fixed by a dealer who spliced the power wires coming from the main fuse. It started it a couple of weeks ago and now it won't start. There isn't spark on any of the plugs. I took apart the wire box and used a tool that lights up when touched to a wire with power. the wires that were spliced (from the main fuse) going into the ignitor all have power. the wires going to each coil do not. Is my Ignitor bad? or is it another problem? any help would be appreciated
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.