Personal Water Craft Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 · (Edited)
96 seadoo gti not starting after new plugs. I replaced the grey lines and cleaned the carbs plus filter.

Now machine just gargles once and then I hear the beep. When I take the plugs out it wants to really turn over. When I put the plugs back in it it just a burp then done.

Not sure what is wrong. I even put the old plugs in and still same problem.

I also put a few drops of gas in spark plug holes and still nothing.

Not sure how me removing the original plugs makes it not start all the way.

Again when the plugs are in it hardly wants to turn over. But when plugs are out it sounds like its about to turn on.

1 - 1 of 1 Posts