Personal Water Craft Forum banner
1 - 2 of 2 Posts

· Registered
2 Posts
I'm havin the similar problems, the bearings have gone at the rear behind the impeller so took the four big bolts out of the venturi and stator and pry'ed them off then pulled hard on the impellor and the shaft came out with it. my bearings had fallen to bits mind.
so I'm looking for a supplier in the uk for a repair kit if anyone can help!
take a look at this website - www.alpha-sports/arctic_cat_tigershark_parts.htm
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.