Personal Water Craft Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
I bought 98 1100 zxi that was blown up. It has a hole in the top of the piston on the front cylinder. Just wondering if this was a comon problem with these.Also if anyone has any ideas as to what would cause this. Any help would be greatly appreciated. The other 2 cylinders are fine.

Thanks Rob.
 

·
Registered
Joined
·
11 Posts
hole in piston

yeah i've noticed quite a few of these skis with a problem seizing or burning a hole in piston on front cyl.Usually its just that the cyl. in question was running too lean.Hopefully you can get away with rebuilding just the one cyl.after you get it running again be sure to fatten it up & check all plugs & get a read on how the mixture is running & adjust accordingly.


Best of luck
 
1 - 2 of 2 Posts
Top