Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
hole in piston

yeah i've noticed quite a few of these skis with a problem seizing or burning a hole in piston on front cyl.Usually its just that the cyl. in question was running too lean.Hopefully you can get away with rebuilding just the one cyl.after you get it running again be sure to fatten it up & check all plugs & get a read on how the mixture is running & adjust accordingly.


Best of luck
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top