Personal Water Craft Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I have searched the forums to find answers as a newby should, and I read something about a reset procedure for these 1200's. I get only a click from the solenoid after hitting the start switch, and the gauge says start. I have ordered a new solenoid cause that seems obvious. I have good fuses in the front of the elec box.

Would I need to do the reset if replacing the battery and if so, what is the Correct proecure from start to finish?

Thanks for any help!
 

·
Registered
Joined
·
3,033 Posts
You can jump the solenoid to be sure it is bad (jump the 2 large leads.........both may be red) and see if it starts.

You may or not need to reset the code. It varies with different model skis, and I can't remember on yours. Security code reset procedure is in the owners manual. You can download a copy here: My Yamaha Prompt - Owners Manual
 
1 - 2 of 2 Posts
Top