Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
17 Posts
gp1200

I have a xl1200 and my ski did the same thing. I found out the oil lines on the injector motor where coming off. The engine will shut down and not even allow you to restart the motor. I would get nothing when hitting the start button. I installed a oil block off today on my ski since it has a brand new motor on it. The oil injection motor is located under the main seat at the front of the motor. If you look down and hit the throttle you should see the cable running to the oil injection motor. When you pull on the throttle the cable will activate the motor on the oil injection pump. Just my 2 cents. I have three ski and a jet boat all run great except my polaris jet ski which looks brand new but will not run. I have spent a ton on it. Now they tell me the EMM is bad. This is after Crankshaft replacement,Crankshaft positioner,TPS replacement, Battery replacement,Fuel Injector Rebuild,Reed Valve Replacement,and much much more. So feel good about your Yamaha. They are great machine.
 
1 - 1 of 1 Posts
Top