camshaft

1 - 1 of 1 Posts

bigboy

Registered

Joined Jul 14, 2008

1 Posts

Discussion Starter • #1 • Jul 14, 2008

Hi i'm new to the forum! Need some help i have a ZXI 1100 1999 can you guy tell me a place i can have new camshaft bearings installation i'm in CT don't know no one in the area that will do it. Please help i wan't to get this in the water soon.Thank's in advance.

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

2011 300x

Kawasaki Jetski

Hi I had a STX 15f, until someone used it and hit a rock and blew the jet pump, which blew the motor. anyways going to look at a 2011 ultra 300x. any thoughts reviews, or shit i should be looking for?
- 0
- 17
- stevemac1 · updated 18 h ago
1997 kawasaki 1100 stx jet ski weak spark where to start

Kawasaki Jetski

Just picked up this 97 1100 stx they told me it shot off last year on the water and would not start they didn't wont to mass with it so here I am. So far I checked gas is good oil is good found weak spark lights the taster barely all 3 cyl. compression 110. Pulled over off cover on electrical...
- 0
- 68
- leo · updated 5 d ago
Troubleshoting for no spark.

Kawasaki Jetski

I have a 1999 Kawi ZXI 1100. It has no spark. I was given this from a friend as they have had enough with trying. So, I want to start from the beginning and figure out what is wrong, and how to fix it. What are some simple things that could cause no spark? He had mentioned he thinks its the...
- 3
- 2K
- S
  swimmer_spe · updated 5 d ago
1987 Kawasaki js440

Kawasaki Jetski

I just purchased a bn44 carb and intake for my ski and I had a spacer on my bn38 carb and when I go to bolt it on the fuel pump hits the head is there a different spacer I need to get thats thicker or do I need to get a different intake.
- 0
- 66
- J
  Jl910 · updated 7 d ago
Kawasaki 900ZXI stuck cylinder block

Kawasaki Jetski

Hello all, I am trying to do a top end job on my 1996 900ZXI and I can’t get the cylinders off the rest of the block. I’ve tried banging it with a mallet and a 2x4 and plenty of PB blaster. Also can’t find a place to get a pry bar on it. Does anyone have a better idea or way to get theses off...
- 0
- 94
- mmspisek · updated 12 d ago