Hi, im new to the pwc world. i jus got a 1996 yamaha waveraider 1100 and had to take off the top end and i looked into the crankcase and noticed the oil sitting in the bottom was quiet dirty. i was wondering if there was a way to clean it out??
can i clean out the old oil in my crankcase??
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
1994 waverunner III engine cuts out.
Yamaha JetskiI just purchased two used (obviously) 1994 waverunner III pwc’s. I rebuilt both carbs and replaced the starter and starter solenoid in one of them. The black one ran perfect. (That was the one that required the most work to get it running). The blue one ran great for the first 20 minutes. The...- 2
- 35
-
Polarbear199 · updated
-
2003 Yamaha XLT 800 66e Projects
Yamaha JetskiIt is a build thread, filled with pictures, my random questions, and hopefully some decent answers, tip, recommendations. I am a newbie to the PWC scene but somewhat of a wrench-turner. Purchased 2x 2003 Yamaha XLT 800's to rebuild as a project. I'll be building the thread as I go, just wanted...- 171
- 5K
-
2005 xlt 1200 water in crankcase
Yamaha JetskiHere is a pic of what I found when i disassembled a XLT1200 recent acquisition. Waverunner has not run since 2016. Don't know the backstory how the water got in, maybe rolled and continued to run? Crank will not spin for obvious reasons. Cylinders were in great shape. Few questions, Is any...- 7
- 253
-
Fuel for FX SHO
Yamaha JetskiI was just wanting some opinions on what kind of fuel to run in a SHO. I know the book says regular is ok but I wanted to see what you guys thought?- 9
- 3K
-
Motor Id
Yamaha JetskiI have a 1998 XL 1200 waverunner and i'm trying to figure out if the motor is a 1200 or a 1200r. I going to set the Popoff pressure on the carbs and the spec pressures are completely different on the two motors.- 1
- 72
Join now to ask and comment!