Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
30 Posts
Hi, forgive me my bad spelling, it's because I'm dutch:D
If you take your carb and the pump is facing you,
then the niple on the left is the return,
the niple on the right is the underpressure (goes to crankcase)
und the last one on the pump is for the gasoline,
the base setting for all screws is 1 turn and then 3/4 turn
open,
also there needs to be a rubber ring inside of the feulpickup,
those are often missing, but the ski will not get enough gasoline
because pressure is leaking of the tank then,
also check the valve on the feulpickup, if you can blow inside from
the other direction then the arrow is pointing then you need to
replace it,
sometimes the 550 ski's with 44 carb won't run well if you use the
on/off/reserve switch, you better try to install the feullines straight
to the carb,
I hope I could help
greetingz from Holland
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top