Changing display to metric on GTX-155
1 - 2 of 2 Posts
Joined
·
811 Posts
The only way to change it, is at a dealer it is set during programing. They have to change it.
That should have been set at time of purchase.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Please help...
Sea-Doo JetskiI have a 96 spx and when I do not have the kill switch pushed in and hit the start button the gas light and water temp light come on and I have full range of the trim... when the kill switch is pressed in all 4 of the lights on the gauge will light up and I get a beep and everything shuts right...- 0
- 27
-
Rebelfox1985 · updated
-
Jet Ski will not turn over with plugs in
Sea-Doo JetskiHi, new to PWC form. I have a problem with a 2003 Sea-doo GTI-LE-RFI I need help with. Ski run well when taken out of the water last fall, winterized and plugs cleaned. New battery this week. Ski will not turn over with the spark plugs in. With one plug out, turns over good and will fire and run...- 13
- 4K
-
93 bombarder
Sea-Doo JetskiI sprayed flued in it started fine then will not start back- 0
- 23
-
Brb81 · updated
-
2015 gtx limited 260 is hood assembly fixes
Sea-Doo JetskiWe have had issues with both or GTX's where the little dowels that pop into the front of the hood assembly break. Any good fixes? We have tried plastic weld and loctite. Without that small piece we can't use the front storage without risking breaking more parts and the full hood assembly is over...- 1
- 87
-
Newbie help
Sea-Doo JetskiHey guys/gals sorry for the length of the post. I am not very familiar with PWCs but have wanted one for a long time. I recently found out a friend had two that he needed of his property when I asked him how much he wanted he gave them to me. One is a 91 bombardier GTX the other is a 93 GT (I...- 0
- 47
-
cowboy1381 · updated
Join now to ask and comment!