Personal Water Craft Forum banner

Dead Speedo

1400 Views 1 Reply 2 Participants Last post by  intwoit
I have a 1997 750 zxi. The speedo no longer works. Is there a way where I can find out if the speed sensor is bad or the gauge is bad. I have a multimeter. What can I check. Hope someone can help!! Thanks
1 - 1 of 2 Posts
You can put a voltmeter set on the lowest range, and connect to ground and the sensor lead you should see fluctuations when you spin the wheel. That will let you know the sensor works
  • Like
Reactions: 1
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.