Personal Water Craft Forum banner

Exhaust problem

2199 Views 2 Replies 3 Participants Last post by  Alex1
I have 1998 aritcat ts770l that will always burn a hole in the rubber exhaust hose after about 4-5 hours on the lake. I was curious if anybody els has had this problem, if so what did you do to fix it. Any suggestion will be helpful.
1 - 1 of 3 Posts
Exhaust Problem

I had the same problem with a 97 model. That is how I came to find this forum. There is a water inlet hose that attaches to the exhaust. On the 97 model it is easiest to trace it backwards from the water outlet on the left side of the hull. The hose will "Y" and the small hose leads to the exhaust. This is probably plugged. When I pulled mine out it was full of sand. I haven't had a problem since.

Good Luck
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top