Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
I bought a used ZXI over the winter, it appears to be in good shape, it starts right up(thanks to the primer the previous owner put on it) I took out into the water for the first time yesterday and slowly took it out of the no wake zone. I ran it around for about 10 minutes at 1/2 to 3/4 throttle and it ran super strong and smooth, i then pulled the throttle all the way to the grip and it pulled even harder, it will run great for about 5 seconds at wide open throttle then it just dies. Any ideas? The motor is completely stock except for the primer. What do you guys think? After runnning it i checked the hull and it was completely dry.:dunno:
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.