Personal Water Craft Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello. First off I am a brand new member, stalked the site for a while and n decided to join. I live in SouthWest Florida....so i have grown up on the water and in boats.

Now onto my issue.

I have an FX140...I am not sure the year...can find out if necessary.
So i take the ski out and after 5 minutes or so the tempeture alarm goes off. The port side jet/pisser/exhaust does have output. Im curios what my next step should be to fix the problem???

Any Ideas?

Thanks
Chris
 

·
Registered
Joined
·
3,033 Posts
Are you getting an error code when the alarm goes off (2 digit code number)? Does it do it on the hose, or only in the water when you are riding?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
The alarm has gone off while flushing the ski with a hose and on the water.
I have not noticed an error code,but I will run it and look tommorow.

Chris
 

·
Registered
Joined
·
3,033 Posts
When the alarm goes off look for an icon on the display as well. If you are not seeing a code, try holding the speed/rpm and volt/hour buttons down for at least 8 seconds while the engine is running or right after you shut it off to get the code to display.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
I can't get a code for you because...well....its not oeverheating anymore dont kno what happened but shes running perfectly now.


Thanks for the help
Chris
 

·
Registered
Joined
·
3,033 Posts
Maybe something causing a partial blockage that got flushed out? Anyhow glad you got it going.
 
1 - 6 of 6 Posts
Top