hi guys im after a lil bit of advice i own a yamaha gp 1300r 2 stroke and the eml light keeps coming on after approx 10 mins of running when i stop the ski and re start light goes off but then comes bk on done a self test and comes up with fault code 12 or 13 cant quite remember any ideas i be great full thanx adam mitch
gp 1300 eml light on
1 - 2 of 2 Posts
Joined
·
1,512 Posts
call yami and ask
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
97 Wave Venture 760
General PWC & Jetski DiscussionI just picked up a 2000 Seadoo GTX that came on a double trailer with a 1997 Yamaha Wave Venture 760 in pieces. I was told everything was included and it just needed to be put together, except the front lid cover. Im starting to believe that is not true and am having trouble finding pieces and...- 2
- 72
-
EZ Dock Port Issues
General PWC & Jetski DiscussionHas anyone had a problem with the EZ port jet ski lifts? I’ve had problems for 2 years now getting mine off the lift. I thought it was a problem with the rollers. When I turned the Waverunner over today to clear a clogged intake I discovered these massive holes in the hull! Th are are obviously...- 7
- 76
-
What damage/problems can be caused by starting out of water wrong?
General PWC & Jetski DiscussionI am new to the forum and was reading a post about turning the water on after the motor is running and turning it off after shutting the engine off. What issues could arise if it was done wrong?- 1
- 64
-
Bobby11 · updated
-
1997 kawasaki 1100 stx jet ski
General PWC & Jetski DiscussionI just bought this ski today. Its my first. Where do I put the oil? Or is it mixed with the fuel??? It fires right up but its bogging down. Its not taking off like it should but when I get it up to speed it seems to run fine. I'm thinking about replacing the carbs and fuels filter and lines. Any...- 0
- 51
-
Cobby1992 · updated
-
1996 seadoo GTX
General PWC & Jetski DiscussionRolled it in the water, flipped it back over counterclockwise. Now it won't go over 4k rpm without dying. Out of water you can rev it all you want no issue, in the water under a load it dies as soon as you try to get on it. Never had an issue till rollover. Thank you in advance!- 0
- 61
-
goosenator28 · updated
Join now to ask and comment!