Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
163 Posts
OK, I'm not quite positive I understand if you're saying that it just takes a while to get to speed or if it's bogging down...

Lets work off of the slow acceleration and then go from there.

Based on the fact that you just put in a new impeller, you may have installed one with an incorrect pitch to the blades. If it's too steep you will loose acceleration.

How did you damage the first impeller?? You may have damaged other things at the same time...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top