I have a polaris 1998 sltx 1050 that I decided to part out and the gauges have never worked on it, I do not know if it was something simple that was not plugged in or a fuse or what? How would I test them to see if they work properly without an operable sltx to put them on? any suggestions? any help is greatly appreciated! Thanks in advance.
How Do I Test My Sltx Gauges?
Join the discussion
Recommended Reading
-
Polaris Freedom 700 to Polaris Freedom 1200
Polaris JetskiHave any of you heard of an engine swap of a Polaris Freedom 700? What added work would need to be done to house the 1200? Just tore out my blown 700 and want to go a little faster... Thanks.- 0
- 57
-
Schmidty50 · updated
-
04 msx140 making me crazy!
Polaris JetskiI recently purchased a 04 Polaris MSX 140 and I've been working on it for the past 6 months with injectors cleaning fuel lines replaced fuel pump replaced and have gotten nowhere what I need to know is how do I get a map for the emm and what cables are available or do I have to make my own to...- 1
- 98
-
zbarinaz · updated
-
1999 slth ignition update kit
Polaris JetskiI am about to install an ignition update kit on my 1999 Polari slth. I read the instructions, and at the end they state to disconnect a ground wire between the electrical box and the battery. The jetski is not at home right now, so I can look at the battery to see the ground wire. Is there...- 4
- 2K
-
carb swap
Polaris Jetskii have a 1998 polaris 1050 with 40mm carbs will a 1999 genises 1200 carb rack bolt right on and work there saying my carbs are discountued- 0
- 173
-
scottybarber · updated
-
Polaris SL 700
Polaris JetskiHello, I have a chance to buy a SL 700 ski for $ 50.00, the guy said its for parts said has motor but maybe missing parts. Not sure if this is a deal or not, if anyone has a suggestion please let me know. Thanks- 2
- 402
Join now to ask and comment!