Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
noticed that one side of the hull is longer than the other

The JS has two plastic parts that are glued on the back of the hull from the factory. They match the curves on the underside. It sounds like one is missing on your boat. These can be purchased like any other part. We used to drill through them when adding a rear exhaust, then fill with foam.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top