Personal Water Craft Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
I have got everything all put together and ready to go, I have spark, the cylinders are getting fuel and the compression is perfect. But it wont fire. the starter spins beutifully. I still need a new battery but even jumping it doesn't do anything. The only thing I can guess is timing. The front cylinder is on TDC, and the F mark on the fly wheel lines up with strobe. Any ideas???
 

·
Registered
Joined
·
227 Posts
Timing isn't usually adjustable but I'm unsure. Stumped me I guess. What is the compression PSI? Did you pour fuel into the cylinders?
 

·
Registered
Joined
·
10 Posts
Discussion Starter #3
Got it to finally fire. Yeah!!! The front plug wire was loose at the CDI unit. It was sparking but very week. BUT then, hooked up a hose to the cooling system and there must be a leak somewhere filled the whole damn thing with water. mother! so now we get to start all over again. at least this time I know where the trouble spots are.
 
1 - 3 of 3 Posts
Top