Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
26 Posts
check the hose going to the pump housing- it might have worn, got bent or clogged- your going to need to drop the ride plate- it happened to one of my x2's when I changed the pump to one with a diferent eblow and ended up bending the hose- compression test and you might be ok with some new rings! good luck
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top