Personal Water Craft Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have worked on engines, but never a jet ski.

Front sediment/water separator near fuel tank is dry.
Filter near the carbs is 1/4 full

I pulled the line from the filter to the carb, and applied suction to the fuel line. Trying to suck gas from the tank.
I get a mix of air/gas when set to the main tank. I get solid gas when I set to the reserve tank.

Any thoughts on where to start?
 

·
Registered
Joined
·
2 Posts
Discussion Starter #2
With the fuel line from the top of the fuel filter disconnected (The line running to the first carb)

I put 10psi in the fuel tank, it sputtered air/gas out the filter, mostly air.
Set the fuel to "reserve" I get a solid stream of fuel with some pressure.

Not sure if this is normal...
 
1 - 2 of 2 Posts
Top