Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13 Posts
Some times a ride plate that is a little longer to project a few more inches out towards the jet will help. A ride plate with skegs/fins may help with turns.

You never avoid the bounce on the stand ups because of the imbalance between the amount of power it produces, and the short hull which isn't long enough to displace the thrust and keep the ski level. Your best bet is to work on different feet/standing positions and practice leaning forward to put more weight out in front of the jet.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top