Joined
·
4 Posts
I need compleat 1100 yamaha engine, with good compression, it should be ready to install, also I need starter and bendix, please e-mail me [email protected]
Need 1100 wave-venture engine
1 - 3 of 3 Posts
Joined
·
1,512 Posts
Joined
·
4 Posts
I have nothing to rebuild, i just need compleate fully working engine
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
2014 Yamaha 1.8 HO Cruiser
Yamaha JetskiWhile changing the spark plugs preparing my ski for this coming season, I noticed corrosion on each plug between the drive hex and the rubber boot attachment area. What could be the cause? Thank you.- 4
- 109
-
Ray Pollard · updated
-
2005 xlt 1200 water in crankcase
Yamaha JetskiHere is a pic of what I found when i disassembled a XLT1200 recent acquisition. Waverunner has not run since 2016. Don't know the backstory how the water got in, maybe rolled and continued to run? Crank will not spin for obvious reasons. Cylinders were in great shape. Few questions, Is any...- 0
- 16
-
2 Non running gp 800s
Yamaha JetskiSo I bought these two yamaha gp 800s yesterday for 400 bucks with a double trailer. The guy that I bought them from said he got them from a buddy back in 2013 and he just said they didnt run. I figured what the heck the trailer is worth the 400 to me. The skis are a 1998 and a 2001. Does anyone...- 25
- 793
-
'05 gp800r premix conversion and gasket application
Yamaha JetskiGood day, just acquired new to me 05 gp800r and 05 xlt1200 from a friend who wanted them gone. both with bad top ends. My first two PWC ever, and I'm pushing 50. I'm pretty handy, but no mechanic. Disassembly went very well, straightforward. found problems with low compression. maybe this...- 11
- 552
-
2018 Yamaha VX Cruiser VX1050A - Service Manual
Yamaha JetskiI looked on email and tried to use Google to get the service manual for my 2018 Yamaha VX Cruiser VX1050A without any success. Any suggestions on where I can get this? I am ok with either digital or a physical copies.- 9
- 159
Join now to ask and comment!