Personal Water Craft Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey all!
2 years ago I put a new impeller in my js, after doing so I never got it to start, it has been sitting since.
Now with everything back together again, I am getting spark, compression is good, right now I am using starter fluid to try to get it to start.

I cranks like hell and I get spark(not sure if it is a lot or enough spark) but it will not fire.

Where do I go from here?
It is sucking air into the carb for sure.
HELPPPPPPPP!!!!!!!!!!!! thanks
Zach
 

·
Registered
Joined
·
36 Posts
What about fuel? Try cranking it over with your hand over the throat of the carb. Your hand should smell like fuel or be wet from it. I wouldnt run that ski off of starter fluid, remember there is no oil in it
 
1 - 2 of 2 Posts
Top