Personal Water Craft Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
285 Posts
Mine has a grease zert towards the back I squirt it with a couple of pumps from the grease gun after every ride, may want to try, it forces out the water and doesn't let it sit in water during the week when i'm not ridding it.
 

·
Registered
Joined
·
285 Posts
mine was already their if i pull the back seat it sits way to the back and you can follow the hose down to the bearing, check and make sure you might already have it and its just laying loose in the bottom of the hull. Not sure if you can drill it and tap to put one it tought? Have to look at a parts break down and see, but i would think its already their, down by the black shroud just off the back of the motor.
 
1 - 2 of 2 Posts
Top