Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
157 Posts
GPguy go to autozone or any autoparts and get some do it your self gasket paper and copy your old gasket and make your self your own gasket also with the paper you can make any other gasket for your motor and also apply some black rtv silicone to the motor or exhoust and let it become tackey so when you put the exhoust back on it wont fall off then put your bolts back on with some new lock washers.

shanep75 the fuse should be on the cover of your relay box where all your wires go to plus it can also be your relay.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top