Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
38 Posts
Pull the spark plugs and make sure the cylinders are clear and not filled with water, after you pull the plugs remove the pto cover and you should be able to rotate the pto. If you can then you have a starter or solenoid bad. If not you have a locked up crank or the starter may be stuck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top