Personal Water Craft Forum banner

No top end

1739 Views 4 Replies 3 Participants Last post by  hambone
I own a 96 sl780 and cannot get my rpm over 4400 and is very sluggish out of the hole, sometimes it snaps out of the hole and sometimes its sluggish, it is got me baffled unless it is a limpmode that i dont know about, any help would be great.
1 - 5 of 5 Posts
when was the last time you put new plugs and rebuilt the carbs
i have not put new plugs in yet, and i was leaving the carb rebuilding as a last option.
sounds like carbs or a fueling issue
watersports06 said:
I own a 96 sl780 and cannot get my rpm over 4400 and is very sluggish out of the hole, sometimes it snaps out of the hole and sometimes its sluggish, it is got me baffled unless it is a limpmode that i dont know about, any help would be great.
I have the same problem with the same kind of machine. New plugs,new gas, carbs cleaned doesn't help. It's always good off the line, but is limited to 4400 rpm. Fuel pump is puting out good. Let me know what fixes yours please.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top