Noob from the Pittsburg area | Personal Water Craft Forum

1 - 1 of 1 Posts

88wr500

·

Registered

Joined Jul 18, 2010

·

5 Posts

Discussion Starter • #1 • Jul 18, 2010

Hi, I just bought my first jet ski and am definatly a newbie to this scene. Anyway I am finaly seeing what I have been mising out on and its great! I bought a crappy old Waverunner 500 and gave it some tlc. I would like to know if anybody has any tips to make this thing run a little better? The ski runs good but is realy slow just tryn to get some more performance.

Thanks
Keith

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

EX vs VX in rough water, any real difference?

General PWC & Jetski Discussion

Bought an 19 EX Deluxe and then got diagnosed with disc problems. Beats the [email protected]#$ out of my back in rough water. Found a deal on a 17 VX Deluxe, at least I think it’s a deal, what would y’all expect for 25 hr boat? BUT, would it be a better ride in rougher water? Thinking of making the change...
- 3
- 84
- I
  ishkrbibbl · updated 1 d ago
Virtual Paint Job?

General PWC & Jetski Discussion

Any sites offer the ability to virtually paint skis to "test" different colors and areas?
- 0
- 25
- T
  T0MMY B0NES · updated 2 d ago
Charging Jet Ski Batteries

General PWC & Jetski Discussion

Newby Jet Ski Owner. Is it a good idea to use a 1 or 2 amp Trickle Charger on the batteries, while the batteries are inside the Jet Ski. I want to keep the batteries charged at all times during the season. Thanks in advance for your replies. Marc5 2020 SeaDoo GTX 170's St. George, Utah
- 4
- 294
- M
  marc5 · updated 2 d ago
2019 VX Cruiser - Want to install iPhone/GPS holder

General PWC & Jetski Discussion

I have two (2) 2019 VX Cruisers that I want to install a sea-worthy and (obviously) water tight holder for my iPhone so I can use the phone's GPS app while I cruise the IWC and islands around me. I can do whatever is needed for installation if someone can show me how. Any info?? Tom
- 0
- 36
- Lexingtom · updated 2 d ago
Preventing Salt Water Corrosion

General PWC & Jetski Discussion

I am doing research for a company that makes a protective coating for the aviation industry and is now looking at the viability of the salt water PWC market. The coating protects both exterior (hull), and engine components. No corrosion after application. Applied by trained professional, like...
- 1
- 139
- K
  Kyle78 · updated 2 d ago

Join now to ask and comment!

Top