Personal Water Craft Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
hi i have a 96 wave blaster last year my son was riding it and it stalled out and i could not get it started . i noticed that the gas level in the filter was low so thinking that the filter was clogged but when ni sucked on the hose i got a mouth full of gas . it starts with starting fluid but it just dies when it's burned . do i need a carb rebuild? gasket kit or the whole thing thanks jim
 

·
Registered
Joined
·
17 Posts
yes but you'll need #2,each carb has a cell fuel pump,i'd take it apart 1st and clean it ,check the micro filter in fuel body,has 2 brass hose fittings next to each other (fuel cell),fuel rblt kit around 20,whole carb, around 60,check your vac lines.good luck
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top