Personal Water Craft Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 99 1050 that has carb issues. the ski had sat for 3 years and it was time to rebuild the sticky carbs. Now Im familar with the CDK 2's however i decided to buy a entire triple carb rack new. i assembled the carbs on the ski and its running worse than it did before. i went and tore down the carbs to make sure the jets and pop off pressure was correct. i could find nothing at all wrong besides the small holes in the ventrui were in different places on the carbs anyone ever seen this?? thanks
 

·
Registered
Joined
·
19 Posts
keihins

there are 38 and 40mm keihins.the 98 slxh,99 slx,00 slx all came with 40's.when the flame arrestor base is bolted on there is a lip where the base is larger than the carb top.those are 40's.if there is no lip they are 38's.40's came in 2 versions,the sl1050 didn't have a accl pump,all others did.the sl1050's had only 2 jets.all other had three.hope this helps
 
1 - 2 of 2 Posts
Top